[. . . ] ® Bottom Mount Refrigerator OVERALL DIMENSIONS PRODUCT MODEL NUMBERS GB2SHDXP GB9SHDXP B Electrical: A 115 Volt, 60 Hz. , AC only 15 or 20 ampere fused, grounded electrical supply is required. [. . . ] If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the system needs to be a minimum of approximately 60 psi (414 kPa). A D including handle C Model GB9SHDXP GB2SHDXP Depth "A" 32 1/2" 32 1/2" Width "B" 29 5/8" 32 5/8" Height "C" 66 7/8" 69 7/8" Cabinet Height "D" 65 5/8" 68 5/8" LOCATION REQUIREMENTS ¹/" (1. 25 cm) To ensure proper ventilation for your refrigerator, allow for 1/2" (1. 25 cm) space at the top and behind the refrigerator for ease of installation. When installing your refrigerator next to a fixed wall, leave 2-1/8" (5. 4 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C). 2¹/" (5. 4 cm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]